+91-9988664895

info@jaibitumen.com

Paint Ink and Coatings Manufacturer & Supplier

Industrial BITUMEN

85/25, 85/40, 90/15, 115/15, 135/10, 155/6
PAINT INK AND COATINGS MANUFACTURER &  SUPPLIERJai Industrial bitumen comply with International Standards. Jai Industrial Bitumen has got a range of uses. It can be used in industries as an adhesive, protective coating, bonding agent, electric insulator and structures below ground. Because of their softening point, it shows excellent physical stability, no exudation or bleeding in contact with highly absorptive material and a remarkable resistance against atmospheric corrosion.

Industrial bitumen conforms to IS: 702/1988 and is characterized mainly by its softening point and penetration value is obtained by penetration apparatus according to IS:1203/78.


Characteristic Requirements For Grades Methods of Test, Ref To
  85/25 85/40 90/15 115/15 135/10 155/6  
Specific gravity at 27°C 1.00-1.05 1.00-1.05 1.01-1.06 1.01- 1.06 1.02-1.07 1.02-1.07 IS:1202-1978
Flash Point, ClevelandOpen Cup, °C, Min. 225 225 225 225 225 225 IS:1209 1978
Softening Point, °C 80-90 80-90 85-100 110-120 130-140 150-160 IS:1205-1978
Penetration at 25°C,100g,5 Sec. 1/10mm 20-30 35-45 l 0-20 8·20 7-12 2-10 IS:1203-1978
Loss on heating, percent by mass, Max.
0.30 0.30 0.30 0.30 0.30 0.30 IS:1212-1978
Penetration of the residue at 25°C, 100g, 5 sec. Percent of original, Min 60 60 60 60 60 60 IS:1203-1 978
Ductility at 27°C, cm, Min. 3 3 2 2 1 0 IS:1208-1978
Matter Soluble in trichloroethylene, percent by mass, Min 99 99 99 99 99 99 IS:1216-1978

Beside these grades, if necessary, we are able to provide special grades of oxidized bitumen.

Packing : In drums of approx. 150/200 kgs. and in multiply paper bages of approx. 50 kgs.

Back to Top