JAI RBA COMPOUND Manufacturer & Supplier

MFD. to IS : 9862
A COLD APPLIED RUBBERISED BITUMINOUS ADHESIVE

Description

JAI RBA COMPOUND (C P R X) is a cold applied rubberised bituminous adhesive in the form of an emulsion of brushable consistency.

Recommended Uses

Ideally recommended for fixing of thermocole, PU foam sheets, PVC tiles and other cellular insulation materials used in Cold storage/Chilling Plants.

Apply JAI RBA COMPOUND by using a stiff haired brush / squeegee on both surfaces and allow to break for 20-25 minutes when the painted film turns dark brown to black. Apply firm pressure over the area to be stuck to expel any trapped air.

Characteristics

Characteristic	Requirements
FORM AND CONDITIONS	Homogenous, Thixotropic.
CONSISTENCY	Smooth and uniform for brushing.
MASS IN Kg PER Ltr.	1+0.09
INITIAL SET	4-6 Hrs.
CURRING TIME (Min.)	24 Hrs.
pH VALUE OF EMULSION	8.0 to 9.5
COVERAGE	1.5 to 1.75 Ltrs./sq.mtr. Per coat
TOTAL NON-VOLATILE MATTER
SOLID BY % AGE (Min.)	50
ASH CONTENT (Max.)	2%
SOLVENT FOR REMOVAL
Wet	Water
Dry	Kerosene / Solvent

Surface Preparation

The surface should be free from dust, grease rust and loose particles.

Instruction

Stir well before use.

Note

Storage life: 1 year in original sealed container in covered dry shed under normal temperature conditions.
Packing : 500 ml /1/4/20/20 Lts. Capacity Tins / Drums.